Table Mount Embroidery Stand with 2-in-1 Clamp 190-26

Table Mount Embroidery Stand with 2-in-1 Clamp 190-26

£48.45
£48.45
Skip to product information
Table Mount Embroidery Stand with 2-in-1 Clamp 190-26
  • Table Mount Embroidery Stand with 2-in-1 Clamp 190-26
  • Table Mount Embroidery Stand with 2-in-1 Clamp 190-26
  • Table Mount Embroidery Stand with 2-in-1 Clamp 190-26
  • Table Mount Embroidery Stand with 2-in-1 Clamp 190-26
  • Table Mount Embroidery Stand with 2-in-1 Clamp 190-26
  • Table Mount Embroidery Stand with 2-in-1 Clamp 190-26
  • Table Mount Embroidery Stand with 2-in-1 Clamp 190-26
  • Table Mount Embroidery Stand with 2-in-1 Clamp 190-26
  • Table Mount Embroidery Stand with 2-in-1 Clamp 190-26
  • Table Mount Embroidery Stand with 2-in-1 Clamp 190-26
  • Table Mount Embroidery Stand with 2-in-1 Clamp 190-26
  • Table Mount Embroidery Stand with 2-in-1 Clamp 190-26
  • Table Mount Embroidery Stand with 2-in-1 Clamp 190-26
  • Table Mount Embroidery Stand with 2-in-1 Clamp 190-26
  • Table Mount Embroidery Stand with 2-in-1 Clamp 190-26
  • Table Mount Embroidery Stand with 2-in-1 Clamp 190-26
Table Mount Embroidery Stand with 2-in-1 Clamp 190-26

Table Mount Embroidery Stand with 2-in-1 Clamp 190-26

£48.45
£48.45

Nurge adjustable wooden embroidery seat stands are made from hard beechwood, fine sanded and polished for a super smooth natural wood finish. These products are the number 1 professional crafters choice for quality. 

The Nurge 190-26 #E3 embroidery stand allows easy embroidering using both hands. The Stand is an evolution of the original Classic Head Nurge Seat Stands except the seat base has been replaced with a simple, cleverly designed clamp to allow you to mount the stand to a table or a solid armed chair.

Note: A piece of scrap fabric is recommended to be inserted between the Stand base and the clamp to avoid marking precious surfaces.

The stand has 4 adjustable joints so that you can find the optimum height, distance and angle depending on your hoop or frame size for maximum working comfort. Additionally, there is an extra joint that allows you to pivot your hoop to the left or right. It will extend out fully to 500mm and fold down to a very small compact height of 135mm. The folded storage length is 210mm x 100mm width.

The 190-26 Unique 2-in-1 Snap Clamp Stand features the latest Nurge clamp which has been uniquely designed so that it can be switched from a Hoop clamp to a Snap Frame clamp.

The clamp will hold all sizes of wooden hoops, typically from 75mm (3”) diameter up to 310mm (12”) – and all depths of hoops 8mm, 16mm or 24mm. It is also suitable for holding the round, square or oblong plastic embroidery frames which are typically 10mm in depth.

To use as a Snap Frame clamp, remove the two screws and simply flip the top and bottom halves of the clamp by 180 degrees and re-insert the screws. The curved internal radius on each half will securely clamp Snap Frames up to 30mm in diameter.

Another unique feature of this clamp is its ability to rotate a full 360 degrees to allow you to work on the back of your project without removing the hoop or frame from the clamp.

Key Features: Genuine NURGE Quality * Unique Clamp * Full 360-degree rotating head * Holds Hoops or Snap Frames * Strong & Sturdy * Lightweight * Optimises working space * Suitable for all types of Embroidery, Tapestry, Cross-stitch, Quilting & Punch Needle projects.

 

You may also like